公开(公告)号：US08705053B2

公开(公告)日：2014-04-22

申请号：US12486371

申请日：2009-06-17

Applicant: Hiroyasu Ito ,  Ichiro Bessho ,  Harumitsu Fujimori

Inventor： Hiroyasu Ito ,  Ichiro Bessho ,  Harumitsu Fujimori

IPC: G06F3/12

CPC classification number: G06F3/128 ,  G06F3/1209 ,  G06F3/1236 ,  G06F9/44584

Abstract: Attachment of a USB memory is sensed and whether the USB memory can be recognized or not is determined based on data information output from the USB memory. When the USB memory cannot be recognized, an emulation transition screen is displayed. Thereafter, when an instruction to start transition to an emulation mode is given, an emulation mode transition instruction signal and an IP address of an MFP on a network are output. Receiving the input of the emulation mode transition instruction signal, an emulation mode start-up/end unit starts up the emulation mode.

Abstract translation: 基于从USB存储器输出的数据信息，检测USB存储器的附着以及是否可以识别USB存储器。 当无法识别USB存储器时，会显示仿真转换画面。 此后，当给出开始转换到仿真模式的指令时，输出网络上的MFP的仿真模式转换指令信号和IP地址。 接收仿真模式转换指令信号的输入，仿真模式启动/结束单元启动仿真模式。

公开(公告)号：US08373869B2

公开(公告)日：2013-02-12

申请号：US12557663

申请日：2009-09-11

Applicant: Koji Tsukada ,  Hiroyasu Ito ,  Harumitsu Fujimori ,  Ichiro Bessho

Inventor： Koji Tsukada ,  Hiroyasu Ito ,  Harumitsu Fujimori ,  Ichiro Bessho

IPC: G06F3/12 ,  G07F19/00

CPC classification number: G07F17/0014 ,  G03G15/5083 ,  G03G15/5087 ,  G03G2215/00109 ,  G06Q20/145 ,  G06Q20/28 ,  G06Q30/0283 ,  G06Q30/04 ,  G07F17/266

Abstract: A charging management server is informed of an ID number stored in an IC card, and a user charging table of the charging management server is read. A new user charging list is transmitted to an MFP. In the case where the MFP receives a cooperative job to be executed by a cooperative server, a sub charging list is generated. The generated new sub charging list is transmitted together with image data to the cooperative server. The cooperative server executes the job on the basis of charging a fee for the job. As the job is executed on the basis of charging, the sub charging list is updated. In parallel with the execution of the cooperative job by the cooperative server, the MFP can perform a normal job according to the charging list.

Abstract translation: 向计费管理服务器通知存储在IC卡中的ID号，读取计费管理服务器的用户计费表。 新的用户充电列表被发送到MFP。 在MFP接收到由协作服务器执行的协作作业的情况下，生成子充电列表。 生成的新子计费列表与图像数据一起发送到协作服务器。 合作服务器在为作业收取费用的基础上执行作业。 随着作业在充电的基础上被执行，子充电列表被更新。 与合作服务器执行协同作业并行，MFP可以根据收费列表执行正常工作。

公开(公告)号：US08375391B2

公开(公告)日：2013-02-12

申请号：US12560500

申请日：2009-09-16

Applicant: Ichiro Bessho ,  Harumitsu Fujimori ,  Hiroyasu Ito

Inventor： Ichiro Bessho ,  Harumitsu Fujimori ,  Hiroyasu Ito

IPC: G06F9/46 ,  G06F15/16 ,  G06F3/12

CPC classification number: G06F11/32 ,  H04N1/00244 ,  H04N1/00347 ,  H04N1/32122 ,  H04N2201/0087 ,  H04N2201/0094 ,  H04N2201/3202

Abstract: Whether a job execution instruction has been issued or not is determined. When it is determined that the job execution instruction has been issued, a job ID is issued. Contents of the job in accordance with the job execution instruction are checked. Then, whether the job is a Scan to USB memory job in an emulation mode or not is determined. When it is determined that the job is the Scan to USB memory job in the emulation mode, a sub job ID brought in correspondence with the issued job ID is issued.

Abstract translation: 确定作业执行指令是否被发出。 当确定已经发出作业执行指令时，发出作业ID。 检查根据作业执行指令的作业内容。 然后，确定作业是否处于仿真模式下的扫描到USB存储器作业。 当在仿真模式中确定作业是扫描到USB存储器作业时，发出与所发出的作业ID相对应带来的副作业ID。

公开(公告)号：US20100241541A1

公开(公告)日：2010-09-23

申请号：US12720955

申请日：2010-03-10

Applicant: Hiroyasu ITO ,  Ichiro Bessho ,  Harumitsu Fujimori ,  Tsutomu Ohata

Inventor： Hiroyasu ITO ,  Ichiro Bessho ,  Harumitsu Fujimori ,  Tsutomu Ohata

IPC: G06Q30/00

CPC classification number: G06Q30/04 ,  G06Q50/06

Abstract: An authentication printing function is performed in a multi function peripheral (MFP). A user transmits a job from a PC to the MFP, and then performs card authentication by bringing cards close to an authentication device. Authenticated-user information is transmitted to the MFP, where the authenticated users are registered. A print job is generated, and a billing scenario is generated in which a charge is allocated among the plurality of authenticated users on the basis of a billing pattern. When the billing scenario is approved by the user, the job is executed, and the authenticated users are each billed for the charge allocated thereto on a per-page or per-set basis, in accordance with the billing scenario. Accordingly, a billing device for an image processing device which can allocate a charge among a plurality of users without the need of complicated operations is provided.

Abstract translation: 在多功能外围设备（MFP）中执行认证打印功能。 用户从PC发送作业到MFP，然后通过将卡片靠近认证设备来执行卡片认证。 认证用户信息被发送到已经认证的用户注册的MFP。 生成打印作业，并且基于计费模式生成在多个认证用户中分配费用的计费方案。 当计费方案被用户批准时，根据计费情况，执行作业，并且按照每页或每个基础，为已分配给它们的费用收取经过身份验证的用户。 因此，提供了一种能够在不需要复杂操作的情况下在多个用户中分配费用的图像处理装置的计费装置。

公开(公告)号：US20100067046A1

公开(公告)日：2010-03-18

申请号：US12557663

申请日：2009-09-11

Applicant: Koji Tsukada ,  Hiroyasu Ito ,  Harumitsu Fujimori ,  Ichiro Bessho

Inventor： Koji Tsukada ,  Hiroyasu Ito ,  Harumitsu Fujimori ,  Ichiro Bessho

IPC: G06F3/12 ,  G06Q10/00 ,  G06Q30/00 ,  G06Q50/00

CPC classification number: G07F17/0014 ,  G03G15/5083 ,  G03G15/5087 ,  G03G2215/00109 ,  G06Q20/145 ,  G06Q20/28 ,  G06Q30/0283 ,  G06Q30/04 ,  G07F17/266

Abstract: A charging management server is informed of an ED number stored in an IC card, and a user charging table of the charging management server is read. A new user charging list is transmitted to an MFP. In the case where the MFP receives a cooperative job to be executed by a cooperative server, a sub charging list is generated. The generated new sub charging list is transmitted together with image data to the cooperative server. The cooperative server executes the job on the basis of charging a fee for the job. As the job is executed on the basis of charging, the sub charging list is updated. In parallel with the execution of the cooperative job by the cooperative server, the WP can perform a normal job according to the charging list.

Abstract translation: 向计费管理服务器通知存储在IC卡中的ED号，读取计费管理服务器的用户计费表。 新的用户充电列表被发送到MFP。 在MFP接收到由协作服务器执行的协作作业的情况下，生成子充电列表。 生成的新子计费列表与图像数据一起发送到协作服务器。 合作服务器在为作业收取费用的基础上执行作业。 随着作业在充电的基础上被执行，子充电列表被更新。 与合作服务器执行协同作业并行，WP可以根据收费列表执行正常工作。

公开(公告)号：US20090316177A1

公开(公告)日：2009-12-24

申请号：US12486371

申请日：2009-06-17

Applicant: Hiroyasu ITO ,  Ichiro BESSHO ,  Harumitsu FUJIMORI

Inventor： Hiroyasu ITO ,  Ichiro BESSHO ,  Harumitsu FUJIMORI

IPC: G06F3/12

CPC classification number: G06F3/128 ,  G06F3/1209 ,  G06F3/1236 ,  G06F9/44584

Abstract: Attachment of a USB memory is sensed and whether the USB memory can be recognized or not is determined based on data information output from the USB memory. When the USB memory cannot be recognized, an emulation transition screen is displayed. Thereafter, when an instruction to start transition to an emulation mode is given, an emulation mode transition instruction signal and an IP address of an MFP on a network are output. Receiving the input of the emulation mode transition instruction signal, an emulation mode start-up/end unit starts up the emulation mode.

Abstract translation: 基于从USB存储器输出的数据信息，检测USB存储器的附着以及是否可以识别USB存储器。 当无法识别USB存储器时，会显示仿真转换画面。 此后，当给出开始转换到仿真模式的指令时，输出网络上的MFP的仿真模式转换指令信号和IP地址。 接收仿真模式转换指令信号的输入，仿真模式启动/结束单元启动仿真模式。

公开(公告)号：US5754922A

公开(公告)日：1998-05-19

申请号：US711070

申请日：1996-09-09

Applicant: Ichiro Bessho

Inventor： Ichiro Bessho

IPC: G03G15/00 ,  G03B27/72 ,  G03G15/04 ,  G03G15/043

CPC classification number: G03G15/043 ,  G03G15/5025

Abstract: This invention concerns an automatic exposure adjusting apparatus which permits infallible production of a signal corresponding exactly to the density of a given original document constantly even when the components of an optical system thereof cause any dispersion or gradual deterioration due to aging. First, the apparatus exposes a standard white subject copy 1 set on a document table 2 to the light of a preset standard amount of exposure, samples the reflected light from the copy 1 by a light detector 14, and adjusts to a proper magnitude the output value of an original document density signal emitted from a noninverting amplifier 33. Then, it exposes the standard density plate 3 to the light of an adjusted standard amount of exposure, samples the reflected light from the standard density plate 3 by the light detector 14, and readjusts to a proper magnitude the output value of an original document density signal issued from the noninverting amplifier 33. By this procedure, the apparatus is enabled to produce infallibly an original document of a proper density constantly.

Abstract translation: 本发明涉及一种自动曝光调节装置，其即使当其光学系统的组件由于老化而导致任何分散或逐渐劣化时，也能够准确地产生与给定原始文档的密度完全对应的信号。 首先，设备将设置在文件台2上的标准白色被摄物体1曝光到预设标准曝光量的光线，通过光检测器14对来自复印件1的反射光进行采样，并将其输出适当的幅度 从同相放大器33发射的原始文件密度信号的值。然后，它将标准密度板3暴露于经调整的标准曝光量的光线上，通过光检测器14对来自标准密度板3的反射光进行采样， 并且将从非反相放大器33发出的原始文档密度信号的输出值重新调整到适当的大小。通过该过程，该装置能够不间断地产生适当密度的原始文档。

公开(公告)号：US08576415B2

公开(公告)日：2013-11-05

申请号：US12486360

申请日：2009-06-17

Applicant: Harumitsu Fujimori ,  Hiroyasu Ito ,  Ichiro Bessho

Inventor： Harumitsu Fujimori ,  Hiroyasu Ito ,  Ichiro Bessho

IPC: G06F3/12

CPC classification number: H04N1/00347 ,  G06F3/1454 ,  H04N1/00244 ,  H04N1/00408 ,  H04N2201/001 ,  H04N2201/0039 ,  H04N2201/0087 ,  H04N2201/0094

Abstract: Attachment of a USB memory is sensed and whether the USB memory can be recognized or not is determined based on data information output from the USB memory. When the USB memory cannot be recognized, an emulation transition screen is displayed. Thereafter, when an instruction to start transition to an emulation mode is given, an emulation mode transition instruction signal and an IP address of an MFP on a network are output. Receiving the input of the emulation mode transition instruction signal, an emulation mode start-up/end unit starts up the emulation mode.

Abstract translation: 基于从USB存储器输出的数据信息，检测USB存储器的附着以及是否可以识别USB存储器。 当无法识别USB存储器时，会显示仿真转换画面。 此后，当给出开始转换到仿真模式的指令时，输出网络上的MFP的仿真模式转换指令信号和IP地址。 接收仿真模式转换指令信号的输入，仿真模式启动/结束单元启动仿真模式。

公开(公告)号：US20090316176A1

公开(公告)日：2009-12-24

申请号：US12486360

申请日：2009-06-17

Applicant: Harumitsu FUJIMORI ,  Hiroyasu ITO ,  Ichiro BESSHO

Inventor： Harumitsu FUJIMORI ,  Hiroyasu ITO ,  Ichiro BESSHO

IPC: G06F3/12 ,  G06F15/00

CPC classification number: H04N1/00347 ,  G06F3/1454 ,  H04N1/00244 ,  H04N1/00408 ,  H04N2201/001 ,  H04N2201/0039 ,  H04N2201/0087 ,  H04N2201/0094

Abstract: Attachment of a USB memory is sensed and whether the USB memory can be recognized or not is determined based on data information output from the USB memory. When the USB memory cannot be recognized, an emulation transition screen is displayed. Thereafter, when an instruction to start transition to an emulation mode is given, an emulation mode transition instruction signal and an IP address of an MFP on a network are output. Receiving the input of the emulation mode transition instruction signal, an emulation mode start-up/end unit starts up the emulation mode.

Abstract translation: 基于从USB存储器输出的数据信息，检测USB存储器的附着以及是否可以识别USB存储器。 当无法识别USB存储器时，会显示仿真转换画面。 此后，当给出开始转换到仿真模式的指令时，输出网络上的MFP的仿真模式转换指令信号和IP地址。 接收仿真模式转换指令信号的输入，仿真模式启动/结束单元启动仿真模式。

公开(公告)号：US20100070976A1

公开(公告)日：2010-03-18

申请号：US12560500

申请日：2009-09-16

Applicant: Ichiro BESSHO ,  Harumitsu Fujimori ,  Hiroyasu Ito

Inventor： Ichiro BESSHO ,  Harumitsu Fujimori ,  Hiroyasu Ito

IPC: G06F9/46 ,  G06F3/048

CPC classification number: G06F11/32 ,  H04N1/00244 ,  H04N1/00347 ,  H04N1/32122 ,  H04N2201/0087 ,  H04N2201/0094 ,  H04N2201/3202

Abstract: Whether a job execution instruction has been issued or not is determined. When it is determined that the job execution instruction has been issued, a job ID is issued. Contents of the job in accordance with the job execution instruction are checked. Then, whether the job is a Scan to USB memory job in an emulation mode or not is determined. When it is determined that the job is the Scan to USB memory job in the emulation mode, a sub job ID brought in correspondence with the issued job ID is issued.

Abstract translation: 确定作业执行指令是否被发出。 当确定已经发出作业执行指令时，发出作业ID。 检查根据作业执行指令的作业内容。 然后，确定作业是否处于仿真模式下的扫描到USB存储器作业。 当在仿真模式中确定作业是扫描到USB存储器作业时，发出与所发出的作业ID相对应带来的副作业ID。