Abstract:
본 발명은 질소산화물 흡장촉매의 재생시 후분사되는 연료로부터 환원제를 생성하여 이를 통해 질소산화물 흡장촉매에 대한 재생을 실시함으로써, 질소산화물(NOx)의 보다 안정된 정화기능을 구현을 도모할 수 있도록 하는 데 그 목적이 있다. 전술한 목적을 달성하기 위해 본 발명은, 디젤엔진의 배기관로에 설치되어 입자상물질(PM)을 포집하는 디젤매연 촉매여과필터(CPF)와; 상기 디젤매연 촉매여과필터(CPF)에 포집된 입자상물질(PM)의 양을 검출하는 차압센서; 상기 배기관로에 설치되는 후분사용 인젝터; 상기 후분사용 인젝터에서 분사되는 연료를 분해하는 디젤연료분해촉매(DFC); 상기 디젤연료분해촉매(DFC)에서 생성된 환원제를 매개로 내부에 축적된 질소산화물(NOx)을 환원처리하여 제거하는 질소산화물 흡장촉매(de-NOx catalyst); 상기 배기관로중에 설치되어 질소산화물(NOx)의 양을 검출하는 감지센서 및; 상기 차압센서를 매개로 상기 디젤매연 촉매여과필터(CPF)의 재생시점을 판단하여 연료의 후분사량을 조절하고, 상기 감지센서를 매개로 상기 질소산화물 흡장촉매(de-NOx catalyst)의 재생시점을 판단하여 연료의 후분사량을 조절하는 제어부를 포함하여 구성된 것을 특징으로 한다.
Abstract:
A purification device for reducing particulate matter and NOx of a diesel engine is provided to prevent sudden oxidation caused by the reaction between post-injected fuel and a de-NOx catalyst, and prevent deterioration of the de-NOx catalyst. A purification device for reducing particulate matter and NOx of a diesel engine(10) includes a CPF(Catalyzed Particulate Filter,14), a differential pressure sensor(20), a post-injector(22), a DFC(Diesel Fuel Cracking Catalyst,16), a de-NOx catalyst(18), a sensor(24), and a controller. The CPF is arranged on an exhaust pipe(12) of the diesel engine so as to collect particulate matter. The differential pressure sensor detects the amount of particulate matter collected in the CPF. The post-injector is arranged on the exhaust pipe. The DFC creates a reducing agent by decomposing the fuel injected from the post-injector. The de-NOx catalyst removes NOx through the reducing agent created in the DFC. The sensor is arranged on the exhaust pipe, and detects the amount of NOx in exhaust gas. The controller determines regeneration timing of the CPF in accordance with the signal output from the differential pressure sensor, adjusts the amount of post-injected fuel, determines regeneration timing of the de-NOx catalyst in accordance with the signal output from the sensor, and adjusts the amount of post-injected fuel.
Abstract:
본발명의실시예에따라서배기가스가지나는배기라인에배치되어배기가스에포함된입자상물질을센싱하는센서유닛은베이스기판, 상기베이스기판의외측면에형성되고, 근처를지나는입자상물질을감지하는전극부, 및상기베이스기판의내부에형성되어발열을통해서상기전극부에부착된입자상물질을태워제거하는히터전극을포함할수 있다. 상기히터전극을커버하는절연층을더 포함할수 있다. 상기베이스기판은일측에배치되는상부기판, 및상기상부기판에접합되는하부기판을포함하고, 상기절연층은상기상부기판과상기하부기판사이에개재될수 있다.
Abstract:
본발명은선택적환원촉매의작동을제어하는제어로직에행해지는보정의신뢰성을확보할수 있는선택적환원촉매의제어로직의보정적합성판단방법및 장치에관한것이다. 본발명의실시예에따른선택적환원촉매의제어로직의보정적합성판단방법은보정이시행된경우, 이전오차와현재오차를기초로보정적합도(suitability function of correction)를계산하는단계; 상기보정적합도를기초로적합도계수를계산하는단계; 보정횟수와적합도횟수를기초로보정이적절하였는지를판단하는단계; 그리고보정이적절하지않았다면, 제어로직을리셋하는단계;를포함할수 있다.
Abstract:
본발명의실시예에따라서배기가스가지나는배기라인에배치되어배기가스에포함된입자상물질을센싱하는센서유닛은베이스기판, 상기베이스기판의외측면에형성되고, 근처를지나는입자상물질을감지하는전극부, 및상기베이스기판의내부에형성되어발열을통해서상기전극부에부착된입자상물질을태워제거하는히터전극을포함할수 있다. 상기히터전극을커버하는절연층을더 포함할수 있다. 상기베이스기판은일측에배치되는상부기판, 및상기상부기판에접합되는하부기판을포함하고, 상기절연층은상기상부기판과상기하부기판사이에개재될수 있다.