Abstract:
폴리올 화합물(a), 유기 디이소시아네이트(b) 및 카르복실기를 갖는 디올 화합물(c)을 반응시켜 얻어지는 이소시아네이트기를 갖는 우레탄 프리폴리머(d)와, 폴리아미노 화합물(e) 및 모노아미노 화합물(f)을 하기의 조건으로 반응시켜 얻어지는, 중량 평균분자량이 80,000~250,000이고, 산가가 3~25 ㎎KOH/g인 폴리우레탄 폴리우레아 수지(A)와 에폭시 수지(B)를 함유하는 것을 특징으로 하는 접착제 조성물(I)을 개시한다. 여기에, (i) 이소시아네이트기를 갖는 우레탄 프리폴리머(d)의 이소시아네이트기와, 폴리아미노 화합물(e) 및 모노아미노 화합물(f)의 아미노기와의 비율이, 아미노기/이소시아네이트기=0.8/1~0.999/1(몰비)이고, 또한 (ii) 폴리아미노 화합물(e)의 아미노기와 모노아미노 화합물(f)의 아미노기와의 합계 100 몰% 중, 폴리아미노 화합물(e)의 아미노기의 비율이 90.0~97.0 몰%이다.
Abstract:
Disclosed is an adhesive composition (I) characterized by containing a polyurethane polyurea resin (A) having a weight average molecular weight of 80,000-250,000 and an acid number of 3-25 mgKOH/g and an epoxy resin (B). The polyurethane polyurea resin (A) is obtained by reacting a urethane prepolymer (d) having an isocyanate group, a polyamino compound (e) and a monoamino compound (f) under the conditions stated below. The urethane prepolymer (d) having an isocyanate group is obtained by reacting a polyol compound (a), an organic diisocyanate (b) and a diol compound (c) having a carboxyl group. (i) The ratio between isocyanate groups of the urethane prepolymer (d) having an isocyanate group and amino groups of the polyamino compound (e) and the monoamino compound (f), namely amino groups/isocyanate groups is from 0.8/1 to 0.999/1 (molar ratio). (ii) The ratio of amino groups of the polyamino compound (e) in the 100 mol% of the total of the amino groups of the polyamide compound (e) and the amino groups of the monoamino compound (f) is 90.0-97.0 mol%.
Abstract:
본 발명은 열 또는 습열 조건하에서 발포나 벗겨짐 등이 발생하지 않고, 편광판의 신축 등에 의해 발생하는 응력집중을 완화하여 액정소자에 색 얼룩·흰 무늬를 발생시키지 않는 점착제의 제공이다. 반응성 관능기 및 에틸렌성 불포화 이중결합을 갖는 단량체(a) 및 상기 단량체(a)와 공중합 가능하고, 상기 단량체(a)와는 다른 에틸렌성 불포화 이중결합을 갖는 단량체(b)를 라디칼 공중합하여 된 중량평균 분자량 100만 이상 200만 이하의 공중합체(A); 상기 공중합체(A) 100 중량부에 대해서, 상기 공중합체(A)의 존재하에서 카르복실기 및 에틸렌성 불포화 이중결합을 갖는 단량체(c) 및 상기 단량체(c)와 공중합 가능하고, 상기 단량체(c)와는 다른 에틸렌성 불포화 이중결합을 갖는 단량체(d)를 라디칼 공중합하여 된 중량평균 분자량 1만 이상 10만 이하의 공중합체(B) 20~100 중량부; 및 상기 공중합체(A) 및/또는 상기 공중합체(B)와 반응 가능한 반응성 관능기를 적어도 2개 갖는 다관능성 화합물(C) 0.003~3 중량부; 로 된 점착제 및 상기 점착제로 된 점착제층이 광학부재의 적어도 한쪽 면에 형성되어 있는 광학부재. 점착제, 광학부재, 편광판, 응력집중, 발포, 벗겨짐, 색 얼룩, 흰 무늬
Abstract:
PURPOSE: An adhesive, its preparation method and an optical member using the adhesive are provided, the prevent the foaming or stripping due to the heat or moisture and the generation of spots on a liquid crystal device using the optical member by relieving the stress concentration due to the stretching of a polarizer. CONSTITUTION: The adhesive comprises 100 parts by weight of (A) a copolymer which is obtained by radical copolymerizing (a) a monomer having a reactive functional group and an ethylenically unsaturated double bond and (b) a monomer copolymerizable with the monomer (a) and having an ethylenically unsaturated double bond different from that of the monomer (a), and has a weight average molecular weight of 1,000,000-2,000,000; 20-100 parts by weight of (B) a copolymer which is obtained by radical copolymerizing (c) a monomer having a carboxyl group and an ethylenically unsaturated double bond and (d) a monomer copolymerizable with the monomer (c) and having an ethylenically unsaturated double bond different from that of the monomer (c) in the presence of the copolymer (A), and has a weight average molecular weight of 10,000-100,000; and 0.003-3 parts by weight of (C) a multifunctional compound having at least two reactive functional groups capable of reacting with the copolymer (A) and/or the copolymer (B).
Abstract:
본 발명은 비접촉 ID의 안테나용에 바람직하게 적용할 수 있다. 도전 물질과 활성 에너지선 중합성 화합물을 함유하는 활성 에너지선 경화형 도전성 페이스트에 관한 것이다. 최근, 정기권의 유효 기한 등의 데이터 송수신에 전파를 사용하고, 그 통신에 필요한 전력도 전파로 발생시키는, 비접촉 ID의 수요가 계속 증가하고 있다. 그 통신·발전을 위한 안테나 회로의 제조에 이용하는 도전성 페이스트에는 열경화형, 열가소성형 도전성 페이스트에 비하여 경화시에 수지 필름 기판에 거의 열이 가해지지 않는다는 점에서, 활성 에너지선 경화형 도전성 페이스트가 검토되고 있는데, 초기 도전성, 성막시의 접착성 등의 점에서 문제점을 가지고 있었다. 본 발명은 상기 도전성 페이스트에 도전성 물질을 제외한 조성물을 가속 전압 150kV, 조사선량 40kGy의 전자선으로 경화시켰을 때의 경화물의 내부 응력이 5∼50㎫인 페이스트를 이용함으로써 상기 문제점의 해결을 도모하였다.