Abstract:
An apparatus and a method for transmitting vehicle diagnosis information are provided to reduce the cost of installation by providing vehicle diagnosis information through the radio of a vehicle, without the necessity of adding a special display unit. An apparatus for transmitting vehicle diagnosis information comprises a vehicle diagnosis module(110), a radio frequency transmitting part(120) and a voice storage part(130). The vehicle diagnosis module(110), connected with the ECU(Electronic Control Unit) of a vehicle through an OBD terminal, collects the state information of various parts from the ECU, and confirms various abnormal states of the vehicle, based on the collected state information. The radio frequency transmitting part(120) transmits the confirmed abnormal states for the whole range of the Rx frequencies of a radio(140) installed in the vehicle. The voice storage part(130) stores voice information for various abnormal states. The radio frequency transmitting part(120) extracts voice information for the confirmed abnormal states from the voice storage part(130) and transmits the extracted voice information.
Abstract translation:提供一种用于传输车辆诊断信息的装置和方法,以通过车辆的无线电提供车辆诊断信息来降低安装成本,而无需添加专用显示单元。 用于发送车辆诊断信息的装置包括车辆诊断模块(110),射频发送部(120)和语音存储部(130)。 通过OBD端子与车辆的ECU(Electronic Control Unit)连接的车辆诊断模块(110)从ECU收集各部分的状态信息,根据收集状态确认车辆的各种异常状态 信息。 无线电频率发送部分(120)针对安装在车辆中的无线电(140)的Rx频率的整个范围发送所确认的异常状态。 语音存储部(130)存储各种异常状态的语音信息。 无线电频率发送部分(120)从语音存储部分(130)提取用于所确认的异常状态的语音信息,并发送所提取的语音信息。
Abstract:
본 발명에 의한 통신단말기를 이용한 번호이동성 제공 방법은 착신번호와 그 착신번호의 이동정보 및 루팅번호를 포함하는 정보를 수집하여 데이터베이스화하는 단계; 연결하고자 하는 착신번호를 입력받는 단계; 상기 착신번호에 대응하는 루팅번호를 상기 데이터베이스에서 검색하는 단계; 및 상기 검색 결과 상기 착신번호가 번호이동되지 않은 경우에는 착신번호만 발신하고, 번호이동된 경우이면 상기 루팅번호를 포함하여 발신하는 단계;를 포함하는 것을 특징으로 하며, 번호이동 서비스로 인한 부가적으로 수행되는 데이터베이스 질의나 호루팅과 같은 망자원의 사용을 효율적으로 줄임으로써 번호이동 서비스 제공에 따른 사업자의 자원 절감을 꾀할 수 있고, 개별 사업자 입장에서는 호 설정 시간 감소로 인해 발신을 시도하는 자사 가입자에게 서비스 품질 향상을 할 수 있으므로, 궁극적으로 번호이동성 서비스 실시에 따른 가입자의 사업자 변경을 막을 수 있는 장점이 있다.
Abstract:
본 발명은 프레임 릴레이와 회선 대행 서비스를 제공하지 못했던 개방형 ATM 교환 시스템에서 프레임 릴레이를 이용하는 사용자와 회선 대행을 이용하는 사용자를 위하여, 미들웨어를 이용하여 프레임 릴레이 연동 및 회선 대행 연동을 가능케 하는 개방형 ATM 교환시스템에서의 프레임 릴레이와 회선대행 연동 방법에 관한 것으로, 이는 교환 시스템을 구성하고 있는 하드웨어나 혹은 운용체계의 상이함에 최소 영향을 받으면서 프레임 릴레이 및 회선 대행 연동 제어 기능을 구현할 수 있어, 재 사용성이 높고, 운용자나 TMN 에이전트로 하여금 운용의 편리성과 프레임 릴레이 및 회선 대행 연동 제어의 관리 및 유지보수의 효율을 높이고자 한다. 개방형 ATM, 프레임 릴레이, 회선 대행 연동, 접근 다중화, 미디어게이트웨이,
Abstract:
An apparatus and a method of vehicle entrance management are provided to prevent vehicle theft and various crimes by authenticating the vehicle on the basis of unique identification information of a vehicle monitoring device and preventing unauthorized entrance. An information transceiver(220) receives unique identification information and vehicle status information from a vehicle monitoring device, when a vehicle mounting the vehicle monitoring device is approached to an entrance of a parking lot. A crossing gate operating unit(230) determines entering permission for the vehicle based on the unique identification information. A vehicle information analysis unit(240) diagnoses the status of the vehicle by analyzing the vehicle status information. An analysis information transmission unit(250) checks out a residence area related with the vehicle based on the unique identification information, and transmits abnormal status to a display device located at the residence area.
Abstract:
A device and a method for providing customized information are provided to enable a shopping mall to attract customers by providing the customized information when a customer vehicle is located in a time slot/place of high probability for visiting the shopping mall, and help the customer safely go shopping by analyzing a state of the vehicle. A vehicle information receiver(200) receives an ID of a vehicle monitoring device mounted on a customer vehicle, which enters each coverage of distributed repeaters. A purchase pattern analyzer(230) generates customized information including AD(ADvertisement) by analyzing a customer purchase pattern linked with vehicle driving. A moving pattern analyzer(220) analyzes a moving pattern of the vehicle based on location/transmission time information of the repeaters transmitting the ID of the vehicle monitoring device, and checks the repeaters/passing time slot based on the moving pattern when the vehicle visits a shopping mall. An information transmitter(240) transmits the customized information to a user mobile terminal and the vehicle monitoring terminal when the vehicle is located in the coverage of the repeaters passed for visiting the shopping mall in the passing time slot.
Abstract:
본 발명은 인터넷망에서 제어노드간 경로의 설정/관리를 위해 제어노드별로 별개의 라우팅(routing) 프로토콜을 이용하지 않고, 경로의 설정/관리를 위한 통합 모듈을 별개로 구비하여, 인터넷망에서 일괄적으로 제어노드간 경로의 설정/관리를 하는 방법 및 장치에 관한 것이다. 본 명세서에서 개시하는 인터넷 망에서 트래픽 경로를 일괄적으로 설정하는 방법은 (a)종단노드간 경로 설정을 제어하는 다수 제어노드간 링크정보를 상기 다수 제어노드로부터 수집하는 단계; (b)상기 수집된 링크정보를 참조하여 상기 다수 제어노드간 최적의 트래픽 경로정보를 산출하는 단계; (c)상기 다수 제어노드에 상기 경로정보를 전송하는 단계; 및 (d)상기 다수 제어노드가 상기 경로 정보를 참조하여 상호간 경로를 설정하는 단계를 포함하여 본 발명의 목적 및 기술적 과제를 달성한다.
Abstract:
A wavelength-independent downstream optical transmitter in an OLT(Optical Line Terminal) in a WDM(Wavelength Division Multiplexing)-PON(Passive Optical Network) and a method thereof are provided to solve an inventory problem in an OLT by adding an MWS(Multi-Wavelength light Source) or a BLS(Broadband Light Source) to the OLT and using a wavelength-independent semiconductor optical amplifier as an OLT optical transmitter. A wavelength-independent downstream optical transmitter in an OLT in a WDM-PON comprises an MWS module(210), a demultiplexing part(221), an optical transmitter(230), and a multiplexing part(222). The MWS module creates a multi-wavelength optical signal through an MWS. The demultiplexing part separates the created multi-wavelength optical signal according to wavelengths. The optical transmitter receives the separated optical signals, and creates their respective downstream optical signals through a wavelength-independent semiconductor optical amplifier. The multiplexing part multiplexes the downstream optical signals.
Abstract:
본 발명에 의한 통신단말기를 이용한 번호이동성 제공 방법은 착신번호와 그 착신번호의 이동정보 및 루팅번호를 포함하는 정보를 수집하여 데이터베이스화하는 단계; 연결하고자 하는 착신번호를 입력받는 단계; 상기 착신번호에 대응하는 루팅번호를 상기 데이터베이스에서 검색하는 단계; 및 상기 검색 결과 상기 착신번호가 번호이동되지 않은 경우에는 착신번호만 발신하고, 번호이동된 경우이면 상기 루팅번호를 포함하여 발신하는 단계;를 포함하는 것을 특징으로 하며, 번호이동 서비스로 인한 부가적으로 수행되는 데이터베이스 질의나 호루팅과 같은 망자원의 사용을 효율적으로 줄임으로써 번호이동 서비스 제공에 따른 사업자의 자원 절감을 꾀할 수 있고, 개별 사업자 입장에서는 호 설정 시간 감소로 인해 발신을 시도하는 자사 가입자에게 서비스 품질 향상을 할 수 있으므로, 궁극적으로 번호이동성 서비스 실시에 따른 가입자의 사업자 변경을 막을 수 있는 장점이 있다.
Abstract:
본 발명은 에이티엠(ATM) 기반 멀티 프로토콜 레이블 스위칭(MPLS) 상에서 작업 경로의 링크나 노드에 장애 발생시 트래픽의 우선 순위에 따라 차별화된 서비스를 지원하기 위한 경로 설정 및 복구 방법에 관한 것이다. 본 발명은, ATM 기반 MPLS 시스템 상에서 우선 순위가 높은 EF 서비스 트래픽의 경우 작업 경로의 기본 레이블 스위치 프로토콜(LSP) 연결 및 상기 작업 경로의 이중화 경로인 복구 LSP 연결을 설정하고, 우선 순위가 낮은 AF 또는 DF 서비스 트래픽의 경우 AF 또는 DF 서비스 트래픽에 대한 작업 경로의 기본 LSP 연결을 설정한다. 이와 같이 설정을 한 후, 링크 장애 발생시 EF 서비스 트래픽은 상기 설정된 복구 LSP 연결을 통하여 포워딩하고 AF 또는 DF 서비스 트래픽은 상기 기본 LSP 연결을 통하여 포워딩하여 경로를 복구한다. 본 발명에 의하면, 작업 경로의 링크나 노드에 장애 발생시 우선 순위가 높은 트래픽을 신속하고 신뢰성 높게 복구함으로써 트래픽의 서비스 품질을 크게 향상시킬 수 있다.
Abstract:
PURPOSE: A method and an apparatus for controlling slow ATM PVC point-to-multipoint connection in an open ATM switching system are provided to increase operators' convenience and re-use of software. CONSTITUTION: When an HMI(Human Machine Interface) operator(710) or a TMN(Telecommunication Management Network) agent(720) inputs a low ATM PVC(Permanent Virtual Circuit) point-to-multipoint route connection registration HMI command language, the HMI command language and a parameter are transmitted to a WSPMCCF(WorkStation PVC point-to-multipoint Connection Control Function) block(730). The WSPMCCF block(730) checks whether the HMI command language and the parameter have been inputted in a suitable format and checks an error of the parameter information of the HMI command language. If there is no error, the WSPMCCF block(730) makes a route side PMCCF(PVC PtMP Connection Control Function) block(822) page a middleware procedure and transfers the slow ATM PVC point-to-multipoint route connection information. The route side PMCCF block(822) requests a CRCF(Connection Resource Control Function) block(824) positioned at the same AMC(Access Multiplex Controller)(820) to allocate VPI and VCI resources, and when the resource allocation is made from the CRCF block(824), the route side PMCCF block(822) transfers a VPI and VCI resource allocation request message of a route side of a switching system to an LIDHF block(814) with the allocated VPI and VCI, the LIDHF(Library Data Handling Function) block(814) requests the CRCF block(816) positioned at the same ACC(810) to allocate VPI and VCI resources. When resource allocation is made from the CRCF block(816), the LIDHF block(814) transfers the allocated VPI and VCI resources to the route side PMCCF block(822) positioned at the AMC(820). The route side PMCCF block(822) pages a leaf side PMCCF block(812) positioned at the ACC(810) through a middle ware procedure if the leaf side is a fast and middle interface. If, however, the leaf side is a slow interface, the route side PMCCF block(830) pages a leaf side PMCCF block(832) positioned at an AMC(832) through a middle procedure.