Abstract:
A single-walled carbon nanotube-based micron scale multiplex biosensor is provided that enables the detection of glucose, lactate, and urea. The sensor is based on modification of semiconducting single-walled carbon nanotubes using a linker that non-covalently associates with the nanotubes and covalently couples to an enzyme. Reaction of a physiological substrate with the enzyme results in increased resistance of the nanotubes within the sensor. The sensor is suitable for use in patient monitoring, particularly in a clinical setting. Incorporation of read out electronics and an RF signal generator into the sensor device enables it to communicate to a relay station or remote receiver. Methods are also provided for fabricating the biosensor device and using the device for detection.
Abstract:
A non-volatile bistable nano-electromechanical switch is provided for use in memory devices and microprocessors. The switch employs carbon nanotubes as the actuation element. A method has been developed for fabricating nanoswitches having one single-walled carbon nanotube as the actuator. The actuation of two different states can be achieved using the same low voltage for each state.
Abstract:
A carbon nanotube-based micron scale chemical sensor or sensor array is provided that enables the remote detection of hydrogen sulfide and other chemicals in a gas stream. The sensor is suitable for use in harsh environments of high temperature and pressure such as those encountered during petrochemical exploration and recovery. Multiplex sensor devices detect two or more chemical agents simultaneously, or they can detect conditions such as pressure, salinity, humidity, pH, or scale-forming ions. Incorporation of read out electronics and an RF signal generator into the sensor device enables it to communicate to a relay station or receiver for 3D mapping or other analysis. Methods are also provided for fabricating the chemical sensor device and using the device for detection.
Abstract:
Methods of performing lithography in films attached to elastomeric substrates are provided, including methods of performing optical lithography using photoresist films on a stretched elastomeric substrate. Also described are flexible electronic devices made by the methods, and patterned substrates having small voids fabricated by the methods.
Abstract:
Nanosubstrates as biosensors, methods of making such nanosubstrates, and methods of using such nanosubstrates to detect biomarkers are described.
Abstract:
A method for high rate assembly of nanoelements into two-dimensional void patterns on a non-conductive substrate surface utilizes an applied electric field to stabilize against forces resulting from pulling the substrate through the surface of a nanoelement suspension. The electric field contours emanating from a conductive layer in the substrate, covered by an insulating layer, are modified by a patterned photoresist layer, resulting in an increased driving force for nanoelements to migrate from a liquid suspension to voids on a patterned substrate having a non-conductive surface. The method can be used for the production of microscale and nanoscale circuits, sensors, and other electronic devices.
Abstract:
A non-volatile bistable nano-electromechanical switch is provided for use in memory devices and microprocessors. The switch employs carbon nanotubes as the actuation element. A method has been developed for fabricating nanoswitches having one single-walled carbon nanotube as the actuator. The actuation of two different states can be achieved using the same low voltage for each state.
Abstract:
A non-volatile bistable nano-electromechanical switch is provided for use in memory devices and microprocessors. The switch employs carbon nanotubes as the actuation element. A method has been developed for fabricating nanoswitches having one single-walled carbon nanotube as the actuator. The actuation of two different states can be achieved using the same low voltage for each state.
Abstract:
A carbon nanotube-based micron scale chemical sensor or sensor array is provided that enables the remote detection of hydrogen sulfide and other chemicals in a gas stream. The sensor is suitable for use in harsh environments of high temperature and pressure such as those encountered during petrochemical exploration and recovery. Multiplex sensor devices detect two or more chemical agents simultaneously, or they can detect conditions such as pressure, salinity, humidity, pH, or scale-forming ions. Incorporation of read out electronics and an RF signal generator into the sensor device enables it to communicate to a relay station or receiver for 3D mapping or other analysis. Methods are also provided for fabricating the chemical sensor device and using the device for detection.